Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi EA80 — Toshiba e-Studio 355

Code: EA80

Description: Stapling jam: Stapling is not performed properly. [MJ-1024]
Remedy: MJ-1024 1. Check if there is any paper in the finisher, saddle stitcher, or on the transport path of the equipment, or on the stapling tray. Remove it if there is. 2. Remove the staple cartridge from the finisher and remove staples stuck in the stapling unit. 3. Check if the connector J8 on the saddle stitcher controller PC board is disconnected from the stitcher home position switches (rear: SW5, front: SW7) or the harnesses are open circuited. Correct if any. 4. Check if the stitcher home position switches are working properly. 5. Replace the stitcher home position switch. 6. Replace the finisher controller PC board.

← Xem tất cả mã lỗi Toshiba e-Studio 355

Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie