Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi EB30 — Toshiba e-Studio 355

Code: EB30

Description: Ready time time-out jam: The equipment judges that the paper transport to the finisher is disabled because of the communication error between the equipment and finisher at the start of printing.
Remedy: 1. Check if there is any paper in the equipment. Remove it if there is. 2. Check if the connector on the equipment is disconnected from the finisher or the harnesses are open circuited. Correct if any. 3. Replace the IPC board. 4. Replace the LGC board. 5. Replace the finisher controller PC board.

← Xem tất cả mã lỗi Toshiba e-Studio 355

Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie