Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi C130 — Toshiba e-Studio 3555C

Code: C130

Description: 1st drawer tray abnormality: The tray-up motor is not rotating or the 1st drawer tray is not moving normally. (the case that paper can be fed from any drawer except the 1st drawer)
Causes: Tray-up motor DRV board LGC board Tray-up sensor
Remedy: 1 Does the tray go up? (Perform the output check: 03-242, 243) Yes 2 No • Check if the connector of the tray-up motor is disconnected (J1079, CN457). • Check if the connector on the DRV board is disconnected. (CN450, CN451, CN457) • Check if the connector on the LGC board is disconnected (CN361, CN362). • Check if the connector pins are disconnected or the harnesses are open circuited. • Check if the conductor pattern on the LGC board is short circuited or open circuited. 2 Is the tray-up sensor working? (Perform the input check: 03-[ALL]OFF/ [0]/[E], 03-[FAX]ON/[4]/[E] Yes 3 No • Check if the connector of the sensor is disconnected (CN460, J1088, J1094, J1097, J1103). • Check if the connector on the DRV board is disconnected. (CN450, CN451, CN460) • Check if the connector on the LGC board is disconnected (CN361, CN362). • Check if the slit reaches the sensor. • Check if the connector pins are disconnected or the harnesses are open circuited. • Check if the conductor pattern on the LGC board is short circuited or open circuited. 3 DRV board • Check if the conductor pattern on the DRV board is short circuited or open circuited. 4 LGC board • Check if the conductor pattern on the LGC board is short circuited or open circuited.

← Xem tất cả mã lỗi Toshiba e-Studio 3555C

Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie