Code: C180
Description: LCF tray-up motor abnormality: The LCF tray- up motor is not rotating or the LCF tray is not moving normally. (the case that paper can be fed from any drawer except the LCF)
Causes: LCF tray-up motor LCF board LGC board LCF tray-up sensor LCF tray bottom sensor
Remedy: 1 Does the tray move? (Perform the output check: 03-271) Yes 2 No • Check if the connector of the LCF tray-up motor is disconnected. (CN5, CN50) • Check if any of the connectors CN100, CN101 and CN103 on the LCF board is disconnected. • Check if the connector CN371 on the LGC board is disconnected. • Check if the connector pins are disconnected or the harnesses are open circuited. • Check if the conductor patterns on the LCF board and LGC board are short circuited or open circuited. 2 Are the LCF tray-up sensor and LCF tray bottom sensor working? (Perform the input check: 03-[COPY]ON/[8]/[A], 03-[COPY]ON/[8]/[E]) Yes 3 No • Check if the connectors of the sensors are disconnected. (CN6, CN63, CN64) • Check if any of the connectors CN100, CN104 and CN105 on the LCF board is disconnected. • Check if the connector CN371 on the LGC board is disconnected. • Check if the slit reaches the sensors. • Check if the connector pins are disconnected or the harnesses are open circuited. • Check if the conductor patterns on the LCF board and LGC board are short circuited or open circuited. 3 LGC board • Check if the conductor pattern on the LGC board is short circuited or open circuited.