Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi E510 — Toshiba e-Studio 3555C

Code: E510

Description: Jam not reaching the ADU entrance sensor: The paper does not reach the ADU entrance sensor after it is switchbacked in the exit/ reverse section.
Causes: Reverse sensor ADU entrance sensor Reverse motor LGC board ADU board Reverse roller Upper exit roller
Remedy: Reverse sensor • Sensor check (Perform the input check: 03-[ALL]OFF/[9]/[D]) • Connector check (J1064, J1104) • Harness check ADU entrance sensor • Sensor check (Perform the input check: 03-[ALL]OFF/[9]/[G]) • Connector check (J1067, CN421) • Harness check Reverse motor • Motor check (Perform the output check: 03-121/171) • Connector check (J1001, J1118, CN351) • Harness check LGC board • Connector check (CN353, CN390) • Harness check • Board check ADU board • Connector check (CN420, CN421, CN422, J1064) • Harness check • Board check Reverse roller Roller check (attrition, deformation, deterioration) Upper exit roller Roller check (attrition, deformation, deterioration)

← Xem tất cả mã lỗi Toshiba e-Studio 3555C

Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie