Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi CB11 — Toshiba e-Studio 3555CSE

Code: CB11

Description: Buffer tray guide motor abnormality: The buffer tray guide motor is not rotating or the buffer tray guide is not moving normally. [MJ-1107/1108]
Causes: MJ-1107 Buffer tray guide motor (M3) Finisher controller PC board
MJ-1108 Buffer tray guide motor Finisher controller PC board
Remedy: MJ-1107 Buffer tray guide If there is mechanical problem when the buffer tray guide is opened/closed while the buffer roller is lifted up, fix the mechanism. Buffer tray guide motor (M3) Check the connectors and harnesses between the buffer tray guide motor (M3) and the finisher control PC board (CN18).
MJ-1108 Buffer tray guide Raise the buffer roller and open/close the buffer tray guide. Fix any mechanical problem. Buffer tray guide motor Check if the connector (CN11) on the finisher controller PC board is disconnected from the buffer tray guide motor (M2) and the harnesses are open circuited. Correct if so.

← Xem tất cả mã lỗi Toshiba e-Studio 3555CSE

Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie