Code: F900
Description: Machine information alignment error
Causes:
Remedy: Setting Recover the machine information by means of the following procedure. <Machine information recovery> 1. Turn the power ON while pressing [6] and the [CLEAR] button simultaneously. 2. Key in [3] to select "3. SRAM Re-Initialize Support", and then press the [START] button. 3. After the operation is completed, shut down the equipment by pressing the [ON/OFF] button. * If it is not recovered, perform the following procedure. 4. Turn the power ON while pressing [3] and the [CLEAR] button simultaneously. 5. Enter the password on the Authentication screen. If no password is set for Service, press the [OK] button without entering anything. If the High Security Mode has been set, enter "#1048#". 6. Key in [5] to select "5. Key Backup Restore", and then press the [START] button. 7. Key in [2] to select "2. Key FROM to SRAM", and then press the [START] button. 8. After the operation is completed, shut down the equipment by pressing the [ON/OFF] button.