Description: Receiving time time-out jam: The printing has been interrupted because of the communication error between the equipment and finisher when the paper is transported from the equipment to the finisher.
Causes: Finisher controller PC board
Remedy: 1 Is the finisher working? Yes Replace the finisher controller PC board. No 2 2 Are the versions of the Finisher, Saddle Stitch Finisher and converter firmware the latest? Yes Download the firmware in the latest version. No 3 3 • Check if the voltage (24V) is being supplied to the finisher. • Check the connection of the LGC board and IPC board • Check if the harness connecting the IPC board and finisher I/F connector of the equipment side is open circuited. • Check if the harness connecting the I/F connector of the finisher side and finisher controller PC board is open circuited.