Description: Paper remaining on the transport path: The multiple feeding of preceding paper caused the misfeeding of upcoming paper.
Causes: Registration sensor LGC board Rollers on the transport path
Remedy: 1 ADU Open the ADU and remove paper if there is any on the transport path. 2 2 Is the registration sensor working? (Perform the input check: 03-[FAX]/ON/ [9]/[A]) Yes Check the rollers. Replace them if they are worn out No 3 3 LGC board 1. Check if the connector CN316 on the LGC board is disconnected. 2. Check if the connector pins are disconnected or the harnesses are open circuited. 3. Check if the conductor patterns on the LGC board are short circuited or open circuited.