Description: Jam not reaching the registration sensor: The original fed from the original feeding tray does not reach the registration sensor.
Causes: Original registration sensor RADF board Pickup roller Replace it if it is worn out Feed roller Replace it if it is worn out. Separation roller Replace it if it is worn out.
Remedy: Pickup roller Feed roller Separation roller Clean them if ther are stained. Original registration sensor • Sensor check (Perform the input check: 03-[FAX] ON[7]/[H]) • Connector check (CN74) • Harness check RADF board • Board check • Connector check (CN74) • Harness check