Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi E15 — Toshiba e-Studio 45

Code: E15

Description: PFP upper cassette misfeeding (paper not reaching the PFP upper feed sensor)
Remedy: Open the PFP side cover. Is there any paper in front of the PFP upper feed sensor? YES Remove the paper. NO Is the PFP upper feed sensor working? (Perform the input check in the test mode: 03-[FAX]OFF/[2]/[D]) NO 1. Check if the connector of the PFP upper feed sensor is disconnected. 2. Check if either of the connectors CN241 or CN243 on the PFP board is disconnected. 3. Check if the connector J312 on the LGC board is disconnected. 4. Check if the connector pins are disconnected and the harnesses are open-circuited. 5. Check if the conductor patterns on the PFP board and LGC board are short- or open-circuited. 6. Replace the PFP upper feed sensor. 7. Replace the PFP board. 8. Replace the LGC board. YES Is the PFP upper cassette feed clutch working? (Perform the output check in the test mode: 03-226) NO 1. Check if the connector of the PFP upper cassette feed clutch is disconnected. 2. Check if any of the connectors CN241, CN242 and CN244 on the PFP board is disconnected. 3. Check if the connector J312 on the LGC board is disconnected. 4. Check if the connector pins are disconnected and the harnesses are open-circuited. 5. Check if the conductor patterns on the PFP board and LGC board are short- or open-circuited. 6. Replace the PFP upper cassette feed clutch. 7. Replace the PFP board. 8. Replace the LGC board. YES Check the PFP upper cassette feed roller and separation roller. Replace them if they are worn out.

← Xem tất cả mã lỗi Toshiba e-Studio 45

Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie