Code: E41
Description: Front cover opened during printing
Remedy: Is the front cover open? YES Shut the cover. NO Is the voltage of 24V being supplied from the power supply unit? (Perform the input check in the test mode: 03-[FAX] ON/[1]/[H]) NO 1. Check if the connector for 24V power supply is disconnected. 2. Check if the connector J319 on the LGC board is disconnected. 3. Check if the connector pins are disconnected and the harnesses are open-circuited. 4. Check if the conductor pattern on the LGC board is short- or open-circuited. 5. Replace the LGC board. YES Is the front cover opening/closing switch working? (Perform the input check in the test mode: 03-[FAX]ON/[2]/[D] NO 1. Check if the connector of the front cover opening/closing switch is disconnected. 2. Check if the connector J305 on the LGC board is disconnected. 3. Check if the connector pins are disconnected and the harnesses are opencircuited. 4. Check if the conductor pattern on the LGC board is short- or open-circuited. 5. Replace the front cover opening/closing switch. 6. Replace the LGC board. YES Replace the LGC board.