Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi E43 — Toshiba e-Studio 45

Code: E43

Description: ADU opened during printing
Remedy: Is the ADU open? YES Remove the paper if there is any, then shut the ADU. NO Is the ADU opening/closing switch working? (Perform the input check in the test mode: 03-[FAX]OFF/ [1]/[F]) NO 1. Check if the connector of the ADU opening/closing switch is disconnected. 2. Check if either of the connectors CN211 or CN217 on the ADU board is disconnected. 3. Check if the connector J316 on the LGC board is disconnected. 4. Check if the connector pins are disconnected and the harnesses are open-circuited. 5. Check if the conductor patterns on the ADU board and LGC board are short- or open-circuited. 6. Replace the ADU opening/closing switch. 7. Replace the ADU board. 8. Replace the LGC board. YES 1. Replace the ADU board. 2. Replace the LGC board.

← Xem tất cả mã lỗi Toshiba e-Studio 45

Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie