Code: E44
Description: Side cover opened during printing
Remedy: Is the side cover open? YES Remove the paper if there is any, then shut the cover. NO Is the side door switch working? (Perform the input check in the test mode: 03-[FAX]ON/[2]/[G]) NO 1. Check if the connector of the side door switch is disconnected. 2. Check if the connector J313 on the LGC board is disconnected. 3. Check if the connector pins are disconnected and the harnesses are opencircuited. 4. Check if the conductor pattern on the LGC board is short- or open-circuited. 5. Replace the side door switch. 6. Replace the LGC board. YES Replace the LGC board.