Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi CA10 — Toshiba e-Studio 450

Code: CA10

Description: Polygonal motor abnormality: The polygonal motor is not rotating normally.
Remedy: Is the polygonal motor rotating? NO 1. Check if the connector of the harness is disconnected between LGC board (CN308) and the laser optical unit? 2. Check if the harness is open-circuited and the connector pin is disconnected. 3. Check if the conductor pattern on the LGC board is short- or open-circuited. 4. Replace the laser optical unit. 5. Replace the LGC board. YES 1. Check if the conductor pattern on the LGC board is short- or open-circuited. 2. Replace the LGC board.

← Xem tất cả mã lỗi Toshiba e-Studio 450

Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie