Code: E190
Description: LCF misfeeding (Paper not reaching the LCF transport sensor): The paper fed from the LCF does not reach the LCF feed sensor.
Causes: LCF transport sensor LCF board LGC board LCF feed clutch LCF feed roller LCF separation roller LCF pickup roller
Remedy: 1 Open the LCF side cover. Is there any paper in front of the LCF transport sensor? Yes Remove the paper. No 2 2 Is the LCF transport sensor working? (Perform the input check in the test mode: FS-03- [F1]ON/[9]/[F]) Yes 3 No • Check if the connector of the LCF transport sensor is disconnected. • Check if either of the connectors CN1 or CN2 on the LCF board is disconnected. • Check if the connector CN315 on the LGC board is disconnected. • Check if the connector pins are disconnected and the harnesses are open circuited. • Check if the conductor patterns on the LCF board and LGC board are short circuited or open circuited. • Replace the LCF transport sensor. • Replace the LCF board. • Replace the LGC board. 3 Is the LCF feed clutch working? (Perform the output check in the test mode: FS-03-209) Yes 4 No • Check if the connector of the LCF feed clutch is disconnected. • Check if any of the connectors CN1 and CN6 on the LCF board is disconnected. • Check if the connector CN315 on the LGC board is disconnected. • Check if the connector pins are disconnected and the harnesses are open circuited. • Check if the conductor patterns on the LCF board and LGC board are short circuited or open circuited. • Replace the LCF feed clutch. • Replace the LCF board. • Replace the LGC board. 4 LCF feed roller Separation roller Pickup roller • Check the LCF feed roller, separation roller and pickup roller. Replace them if they are worn out.