Description: Rear alignment plate home position error: The rear alignment plate is not at the home position. [MJ- 1109/1110]
Causes: Rear alignment plate home position sensor (S8) Rear alignment motor (M6) Finisher controller PC board (FIN)
Remedy: Rear alignment plate Move the rear alignment plate. Fix any mechanical problem. Rear alignment plate home position sensor (S8) Check if there is a disconnection of the connector, incorrect installation or breakage of the rear alignment plate home position sensor (S8). If there is, reinstall the sensor correctly or replace it. Check if the connector (CN25) on the finisher controller PC board is disconnected from the rear alignment plate home position sensor (S8) and the harnesses are open circuited. Correct if so. Rear alignment motor (M6) Check if the connector (CN18) on the finisher controller PC board is disconnected from the rear alignment motor (M6) and the harnesses are open circuited. Correct if so.