Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi C260 — Toshiba e-Studio 4508AG

Code: C260

Description: Peak detection error
Causes: LED lamp unit Lens unit SYS board Harness
Remedy: 1 Is the exposure lamp lit? (Output check: FS-03-267) Yes It is lit. 2 No It is not lit. 3 2 Shading correction plate 1. Check if there is any scratch or stain on the shading correction plate. 2. Check if the shading correction plate is any scratch or dirty. Mirror 1. Check if the mirror is tilted. - Check that the lens is reflected in the mirror looking at carriage-1 from an upper position. - Check that the mirror is secured at the leaf spring. Notes: Do not turn the mirror adjustment screw more than necessary. Carriage 1. Check if the carriage is tilted by moving it to the left stopping point. 2. Check if the wire fixing screw is loosened. 3. Check if the movement of the carriage is unstable due to disengagement of the carriage roller. Exposure lamp 1. Check if the exposure lamp is flickering when it is turned on. 2. Check if the connector is properly connected all the way in the board of LED lamp unit. 3. While the carriage is being driven, check if the harness catches it or interferes with it. CCD board 1. Check if the connector is properly connected all the way in the CCD board. 2. Check if the CCD board or the lens unit is tilted. Check if the screw is securely tightened. 3. Replace the lens unit. SYS board 1. Check if the connector is properly connected all the way in the SYS board. (CN120, CN123) 2. Check if there is any abnormality in the parts mounted on the SYS board or in the appearance of the SYS board. 3. Check if the voltage is output from the power supply for the CCD. 4. Replace the SYS board. 3 Exposure lamp 1. Check if the connector is properly connected to the board of LED lamp unit. 2. Check if there are any scratches or damage on the board of LED lamp unit. 3. Replace the exposure lamp unit. Harness 1. Check if wiring of the harness (CN125 on the SYS board) is abnormal. 2. Check if the harness (CN125 on the SYS board) has any scratch on it or is open circuited or caught anywhere. 3. Replace the harness (CN125 on the SYS board).

← Xem tất cả mã lỗi Toshiba e-Studio 4508AG

Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie