Code: E552
Description: Paper remaining jam on the transport path (when the cover is closed)
Causes: Sensor in the jamming area. LGC board
Remedy: 1 Jamming transport path Open the cover of the unit/area whose picture is flashing on the control panel and remove any paper on the transport path. 2 Sensor in the jamming area • Sensor check (Refer to the table below) • Harness check • Connector check 3 LGC board • Harness check • Connector check • Board check Notes: If the jam is occurring in the ADU, LCF or PFP, check the board in each unit.
Paper path section Side cover Registration sensor FS-03-[ALL]OFF/[9]/[A] 1st transport sensor FS-03-[ALL]OFF/[9]/[B] Fuser Fuser / paper exit unit Exit sensor FS-03-[ALL]OFF/[9]/[C] Reverse sensor FS-03-[ALL]OFF/[9]/[D]
Paper path section Side cover Registration sensor FS-03-[ALL]OFF/[9]/[A] 1st transport sensor FS-03-[ALL]OFF/[9]/[B] Fuser Fuser / paper exit unit Exit sensor FS-03-[ALL]OFF/[9]/[C] Reverse sensor FS-03-[ALL]OFF/[9]/[D]