Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi EA26 — Toshiba e-Studio 4508AG

Code: EA26

Description: Paper transport jam in the Finisher (stop command request): The equipment is required to stop during the transporting of paper in the Finisher. [MJ-1042] Paper transport jam (stop command request): A command to stop equipment operation is received while paper is being transported in the Finisher. [MJ-1109/1110]
Causes: Finisher control PC board (FIN) LGC board (LGC)
Remedy: Finisher • Check if the harness connecting the equipment and the finisher controller PC board is disconnected or open circuited. • Check if the conductor pattern on the finisher controller PC board is open circuited or short circuited. • Update the finisher firmware. • Replace the finisher control PC board. LGC board • Check if the harness connecting the finisher and the LGC board on the equipment is disconnected or open circuited. • Connector check • Check if the conductor pattern on the LGC board is open circuited or short circuited. • Replace the LGC board.

← Xem tất cả mã lỗi Toshiba e-Studio 4508AG

Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie