Description: Main motor abnormality: The main motor is not rotating normally.
Remedy: Is the main motor working? (Perform the output check: 03-101/151) NO 1. Check if the connector J581 of the main motor is disconnected. 2. Check if the connector CN347 on the LGC board is disconnected. 3. Check if the connector pins are disconnected or the harnesses are opencircuited. 4. Check if the conductor patterns on the main motor board and LGC board are short- or open-circuited. 5. Replace the main motor. 6. Replace the LGC board. YES 1. Check if the PLL lock signal CN347-8 pin output from the LGC board is always level “L”. 2. Check if the voltage supplied to the ASIC input terminal IC38-152 pin is always “L”. 3. Replace the LGC board.