Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi E011 — Toshiba e-Studio 4511

Code: E011

Description: Paper jam caused by clinging to the transfer belt
Remedy: Open the jam access cover. Is the paper clinging to the transfer belt? Is the paper clinging to the transfer belt entering under the receiving tray? YES 1. Remove the paper. 2. Use the paper within the specification if the thin paper being used is out of specification. Notes: 1. If the paper is remaining under the receiving tray, a scratched image occurs at printing in the color modes. 2. The paper smaller than B5 may easily enter under the receiving tray. NO Is there any stain or poor cleaning area on the transfer belt? YES 1. Clean the transfer belt. 2. Check the installation and operation of the transfer belt cleaner. NO Is the paper clinging detection sensor working? (Perform the input check: 03-[FAX]OFF/[9]/[H]) NO 1. Is the detection area of the paper clinging detection sensor dirty? 2. Check if the connector of the paper clinging detection sensor and joint connectors (3 pcs.) are disconnected. 3. Check if the connector CN331 of the LGC board is disconnected. 4. Check if the harness is open-circuited or the connector pin is disconnected. 5. Replace the paper clinging detection sensor. 6. Replace the LGC board. YES Replace the LGC board.

← Xem tất cả mã lỗi Toshiba e-Studio 4511

Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie