Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi E030 — Toshiba e-Studio 4511

Code: E030

Description: Power-ON jam: The paper is remaining on the paper transport path when power is turned ON.
Remedy: Open the cover of the unit/area whose picture is flashing on the control panel. Is there any paper on the transport path? (Refer to the following table) YES Remove the paper. NO Is the sensor in the jamming area working? (Perform the input check: Refer to the following table.) NO 1. Check if the connector of the sensor is disconnected. 2. Check if any of the connectors on the LGC board is disconnected. 3. Check if the connector pins are disconnected or the harnesses are open-circuited. 4. Check if the conductor pattern on the LGC board is short- or open-circuited. 5. Replace the sensor. 6. Replace the LGC board. YES Replace the LGC board.
Registration area Exit area ADU Feeding area (equipment) Bypass unit LCF PFP Bridge unit Test Mode/Input check 03-[FAX]ON/[9]/[E] 03-[FAX]ON/[3]/[H] 03-[FAX]OFF/[7]/[H] 03-[FAX]OFF/[8]/[H] 03-[FAX]OFF/[8]/[G] 03-[FAX]ON/[3]/[G] 03-[FAX]ON/[9]/[D] 03-[FAX]OFF/[5]/[G] 03-[FAX]OFF/[2]/[D] 03-[FAX]OFF/[4]/[D] 03-[FAX]ON/[0]/[C] 03-[FAX]ON/[0]/[A]

← Xem tất cả mã lỗi Toshiba e-Studio 4511

Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie