Code: E713
Description: Stop jam at the original length sensor: The trailing edge of the original does not pass the original length sensor after its leading edge has reached this sensor.
Remedy: Are the pickup roller, feed roller and separation roller stained or worn out? YES Clean the rollers or replace them. NO Is the original excessively curled or folded? YES Flatten and set it again. NO Are the original length sensor and registration sensor working? (Perform the input check: 03-[FAX]ON/[8]/[E], [7]/[H]) NO 1. Check if the connectors of the original length sensor and registration sensor are disconnected. 2. Check if the connector CN3 on the RADF board is disconnected. 3. Check if the connector pins are disconnected or the harnesses are open-circuited. 4. Check if the conductor pattern on the RADF board is short- or open-circuited. 5. Replace the original length sensor and registration sensor. 6. Replace the RADF board. YES Replace the RADF board.