Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi CEE1 — Toshiba e-Studio 451c

Code: CEE1

Description: Transfer belt position detection abnormality (when decelerating): Reference position of the transfer belt cannot be detected.
Remedy: Is there any stain or scratch on the reflection tape inside the transfer belt? ↓→ YES → Clean the transfer belt or replace it. Replace the cleaning pad if it is excessively stained. NO Are the transfer belt home position sensors-1 and -2 stained? → YES → Clean them. NO Are the transfer belt home position sensors-1 and -2 working properly? (Perform the input check:03-[FAX]ON/[9]/[H]) ↓→ NO → 1) Check if the connectors or joint connectors of the transfer belt home position sensors-1 and -2 are disconnected. 2) Check if the connector CN361 on the LGC board is disconnected. 3) Check if the connector pins are disconnected or the wires of harnesses are open circuited. 4) Check if the conductor pattern on the LGC board is short circuited or open circuited. 5) Replace the transfer belt home position sensor-1 and -2. 6) Replace the LGC board. YES 1) Check if the conductor pattern on the LGC board is short circuited or open circuited. 2) Replace the LGC board.

← Xem tất cả mã lỗi Toshiba e-Studio 451c

Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie