Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi E020 — Toshiba e-Studio 451c

Code: E020

Description: Stop jam at the exit sensor: The trailing edge of the paper does not pass the exit sensor after its leading edge has reached this sensor.
Remedy: Open the jam access cover. Is there any paper on the transport path? → YES → Remove the paper. NO Is the exit sensor working? (Perform the input check: 03-[FAX]OFF/[7]/[H]) ↓→ NO → 1) Check if the connector of the exit sensor is disconnected. 2) Check if the connector CN334 on the LGC board is disconnected. 3) Check if the connector pins are disconnected or the harnesses are open circuited. 4) Check if the conductor pattern on the LGC board is short circuited or open circuited. 5) Replace the exit sensor. 6) Replace the LGC board. YES Check the exit roller. Replace it if it is worn out.

← Xem tất cả mã lỗi Toshiba e-Studio 451c

Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie