Code: E140
Description: 2nd drawer misfeeding (Paper not reaching the 2nd drawer feed sensor): The paper fed from the 2nd drawer does not reach the 2nd drawer feed sensor.
Remedy: Open the side cover. Is there any paper in front of the lower drawer feed sensor? → YES → Remove the paper. NO Is the lower drawer feed sensor working? (Perform the input check: 03-[FAX]ON/[3]/[G]) ↓→ NO → 1) Check if the connector of the lower drawer feed sensor is disconnected. 2) Check if the connector CN338 on the LGC board is disconnected. 3) Check if the connector pins are disconnected or the harnesses are open circuited. 4) Check if the conductor pattern on the LGC board is short circuited or open circuited. 5) Replace the lower drawer feed sensor. 6) Replace the LGC board. YES Is the lower drawer feed clutch working? (Perform the output check: 03-202) ↓→ NO → 1) Check if the connector of the lower drawer feed clutch is disconnected. 2) Check if the connector CN341 on the LGC board is disconnected. 3) Check if the connector pins are disconnected or the harnesses are open circuited. 4) Check if the conductor pattern on the LGC board is short circuited or open circuited. 5) Replace the lower drawer feed clutch. 6) Replace the LGC board. YES Check the lower drawer feed roller, separation roller and pickup roller. Replace them if they are worn out.