Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi E712 — Toshiba e-Studio 451c

Code: E712

Description: Jam not reaching the original registration sensor: The original fed from the original feeding tray does not reach the original registration sensor
Remedy: Are the pickup roller, feed roller and separation roller stained or worn out? → YES → Clean the rollers or replace them. NO Is the original excessively curled or folded? → YES → Flatten and set it again. NO Is the original registration sensor working? (Perform the input check: 03-[FAX]ON/[7]/[H]) ↓→ NO → 1) Check if the connector of the original registration sensor is disconnected. 2) Check if the connector CN74 on the RADF board is disconnected. 3) Check if the connector pins are disconnected or the harnesses are open circuited. 4) Check if the conductor pattern on the RADF board is short circuited or open circuited. 5) Replace the original registration sensor. 6) Replace the RADF board. YES Replace the RADF board.

← Xem tất cả mã lỗi Toshiba e-Studio 451c

Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie