Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi EB50 — Toshiba e-Studio 451c

Code: EB50

Description: Paper remaining on the transport path: The multiple feeding of preceding paper caused the misfeeding of upcoming paper.
Remedy: When the paper is fed from any of the upper drawer, bypass feed unit or ADU: Open the jam access cover. Is there any paper in front of the registration sensor? → YES → Remove the paper. NO When the paper is fed from the upper drawer: Is the upper drawer feed sensor working? (Perform the input check: 03-[FAX]ON/[3]/[H]) ↓→ NO → 1) Check if the connector of the upper drawer feed sensor is disconnected. 2) Check if the connector CN338 on the LGC board is disconnected. 3) Check if the connector pins are disconnected or the harnesses are open circuited. 4) Check if the conductor pattern on the LGC board is short circuited or open circuited. 5) Replace the upper drawer feed sensor. 6) Replace the LGC board. YES When the paper is fed from the bypass feed unit: Is the bypass feed sensor working? (Perform the input check: 03-[FAX]ON/[9]/[D]) ↓→ NO → 1) Check if the connector of the bypass feed sensor is disconnected. 2) Check if the connector CN340 on the LGC board is disconnected. 3) Check if the connector pins are disconnected or the harnesses are open circuited. 4) Check if the conductor pattern on the LGC board is short circuited or open circuited. 5) Replace the bypass feed sensor. 6) Replace the LGC board. YES When the paper is fed from the ADU: Is the ADU exit sensor working? (Perform the input check: 03-[FAX]OFF/[8]/[G]) ↓→ NO → 1) Check if the connector of the ADU exit sensor is disconnected. 2) Check if either of the connectors CN211 or CN213 on the ADU board is disconnected. 3) Check if the connector CN340 on the LGC board is disconnected. 4) Check if the connector pins are disconnected or the harnesses are open circuited. 5) Check if the conductor patterns on the ADU board and LGC board are short circuited or open circuited. 6) Replace the ADU exit sensor. 7) Replace the ADU board. 8) Replace the LGC board. YES Is the registration sensor working? (Perform the input check: 03-[FAX]ON/[9]/[E]) ↓→ NO → 1) Check if the connector of the registration sensor is disconnected. 2) Check if the connector CN338 on the LGC board is disconnected. 3) Check if the connector pins are disconnected or the harnesses are open circuited. 4) Check if the conductor pattern on the LGC board is short circuited or open circuited. 5) Replace the registration sensor. 6) Replace the LGC board. YES Check the rollers. Replace them if they are worn out. When the paper is fed from any of the lower drawer, PFP or LCF: Open the jam access cover. Is there any paper in front of the upper drawer feed sensor? → YES → Remove the paper. NO Are the upper/lower drawer feed sensors working? (Perform the input check: 03-[FAX]ON/[3]/[H], /[3]/[G]) ↓→ NO → 1) Check if the connectors of the upper/lower drawer feed sensors are disconnected. 2) Check if the connector CN338 on the LGC board is disconnected. 3) Check if the connector pins are disconnected or the harnesses are open circuited. 4) Check if the conductor pattern on the LGC board is short circuited or open circuited. 5) Replace the upper/lower drawer feed sensors. 6) Replace the LGC board. YES Check the rollers. Replace them if they are worn out.

← Xem tất cả mã lỗi Toshiba e-Studio 451c

Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie