Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi E741 — Toshiba e-Studio 452

Code: E741

Description: Stop jam at the reverse sensor: The trailing edge of the original does not pass the reversal sensor after its leading edge has reached this sensor.
Remedy: Are the read roller and reverse roller stained? YES Clean the rollers. NO Is the reverse sensor working? (Perform the input check: 03-[FAX]ON/[7]/[F]) NO 1. Check if the connector of the reverse sensor is disconnected. 2. Check if the connector CN4 on the RADF board is disconnected. 3. Check if the connector pins are disconnected or the harnesses are opencircuited. 4. Check if the conductor pattern on the RADF board is short- or open-circuited. 5. Replace the reverse sensor. 6. Replace the RADF board. YES Replace the RADF board.

← Xem tất cả mã lỗi Toshiba e-Studio 452

Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie