Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi E714 — Toshiba e-Studio 453

Code: E714

Description: Feed signal reception jam: The feed signal is received even no original exists on the original feeding tray.
Remedy: Is the empty sensor working? (Perform the input check: 03-[FAX]ON/[7]/[B]) NO 1. Check if the lever of empty sensor is working normally. 2. Check if the connector of the empty sensor is disconnected. 3. Check if the connector CN5 on the RADF board is disconnected. 4. Check if the connector pins are disconnected or the harnesses are opencircuited. 5. Check if the conductor pattern on the RADF board is short- or open-circuited. 6. Replace the empty sensor. 7. Replace the RADF board. YES Replace the RADF board.

← Xem tất cả mã lỗi Toshiba e-Studio 453

Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie