Code: E960
Description: Jam not reaching the offset tray transport sensor: The paper has passed through the exit sensor does not reach the offset tray transport sensor.
Remedy: Open the OCT cover. Is there any paper on the transport path? YES Remove the paper. NO Is the OCT feed sensor working? (Perform the input check in the test mode:03-[FAX]ON/[3]/[H]) NO 1. Check if the connector of the OCT feed sensor is disconnected. 2. Check if either of the connectors CN260 or CN261 on the OCT board is disconnected. 3. Check if the connector CN302 on the LGC board is disconnected. 4. Check if the connector pins are disconnected and the harnesses are opencircuited. 5. Check if the conductor patterns on the OCT board and LGC board are shortor open-circuited. 6. Replace the OCT feed sensor. 7. Replace the OCT board. 8. Replace the LGC board. YES 1. Replace the OCT board. 2. Replace the LGC board.