Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi CC90 — Toshiba e-Studio 4540c

Code: CC90

Description: Tray shift motor abnormality: The tray shift motor is not rotating or the stack tray is not moving normally.
Causes: Tray clock sensor (SR9) Tray lower limit sensor (SR5) Tray 500 sensor (SR4) Sensor controller PC board Finisher control PC board Tray shift motor (M2)
Remedy: Tray shift motor (M2) Check the connectors and harnesses between the finisher controller PC board and tray shift motor (M2). Stack tray Check if the front and rear sides of the stack tray are leveled. Tray clock sensor (SR9) Sensor check Tray lower limit sensor (SR5) Sensor check Tray 500 sensor (SR4) Sensor check Tray safety switch (SW2) Switch check Finisher controller PC board Check if the voltage between the pins J114-1 and J114-2 on the finisher controller PC b

← Xem tất cả mã lỗi Toshiba e-Studio 4540c

Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie