Remedy: MJ-1101 (When MJ-6101 is installed) Is there any paper remaining on the transport path? ..YES Remove the paper. NO Rotate the skew adjustment motor (M1). Does it rotate smoothly? ..NO Fix the mechanism. YES Are the skew home position sensor (S2) and its wiring correct? ..NO Replace the sensor. Correct the wiring. YES Is the wiring between the hole punch control PC board (HP) and skew adjustment motor (M1) correct? ..NO Correct the wiring. YES 1. Replace the skew adjustment motor (M1). 2. Replace the hole punch control PC board (HP).