Description: Punch motor home position detection error
Remedy: MJ-1101 (When MJ-6101 is installed) Is there any paper remaining on the transport path? ..YES Remove the paper. NO Rotate the punch motor (M3). Does it rotate smoothly? ..NO Fix the mechanism. YES Are the punch home position sensor (S4) and its wiring correct? ..NO Replace the sensor. Correct the wiring. YES Is the wiring between the hole punch control PC board (HP) and punch motor (M3) correct? ..NO Correct the wiring. YES 1. Replace the punch motor (M3). 2. Replace the hole punch control PC board (HP).