Description: Cover open jam in the read ready status: Jam caused by opening of the RADF jam access cover or front cover while the RADF is waiting for the scanning start signal from the equipment.
Remedy: 1. Close the RADF jam access cover or the front cover if they are opened in the read ready status. 2. Is the RADF jam access cover sensor working? (Perform the input check: 03-[FAX]ON/[7]/[C]) 3. Check if the connector CN75 on the RADF board is disconnected from the RADF jam access cover sensor or the harnesses are open circuited. Correct if any. 4. Replace the RADF jam access cover sensor. 5. Replace the RADF board.