Description: Door open jam: The delivery cover or inlet cover has opened during printing. [MJ-1108]
Causes: Saddle stitch unit opening/closing switch Finisher controller PC board Interface PC board
Remedy: Saddle stitch unit Close the saddle stitch unit if it is open. Finisher, stacker Remove any paper on the stacker. Saddle stitch unit opening/closing switch Check if there is a disconnection of the connector, incorrect installation or breakage of the saddle stitch unit opening/ closing switch (SW5). If there is, reinstall the sensor correctly or replace it. Check if the harness between the saddle stitch unit opening/ closing switch (SW5) and the CN13 of the saddle control PC board or the CN2 of the interface PC board (I/F) is disconnected or open circuited. Correct if so.