Code: EAA0
Description: Paper remaining in Saddle Stitch Finisher: Paper remaining in Saddle Stitch Finisher [MJ- 1108]
Causes: Junction box paper detection sensor (S26) Transport path-2 (S27) Transport path-3 (S28) Ejecting roller (S29) Interface PC board (I/F) Saddle stitcher controller board
Remedy: Finisher, saddle stitcher • Check if there is any paper in the finisher, saddle stitcher or the on the transport path of the equipment. Remove it if there is. • Use paper accepted in the specifications. Paper Do not use the paper shorter than the specification. Junction box paper detection sensor (S24) • Sensor check(S24) • Connector check(CN8) • Harness check Transport path-2 (S27) • Sensor check(S27) • Connector check(CN20) • Harness check Transport path-3 (S28) • Sensor check(S28) • Connector check(CN20) • Harness check Ejecting roller sensor(S29) • Sensor check(S29) • Connector check(CN20) • Harness check Interface PC board (I/F) • Board check • Connector check(CN1, CN2, CN5, CN7, CN8) • Harness check Saddle stitcher controller board • Board check • Connector check(CN10, CN13, CN20) • Harness check