Description: Skew adjustment motor (M1) home position detection abnormality: The Skew adjustment motor is not at the home position. [MJ-1107/ 1108 (when MJ-6104 is installed)]
Causes: Skew adjustment motor Skew HP sensor Hole punch control PC board
Remedy: Skew adjustment motor (M1) Rotate skew adjustment motor and fix its mechanism if it does not rotate smoothly. Skew HP sensor (S2) Skew adjustment motor (M1) Hole punch control PC board Check if the connectors on the hole punch controller PC board (HP board) are disconnected from the skew HP sensor (S2) and the skew adjustment motor, or the harnesses are open circuited. Correct if any.