Code: C150
Description: PFP upper drawer tray abnormality: The PFP upper drawer tray-up motor is not rotating or the PFP upper drawer tray is not moving normally. (the case that paper can be fed from any drawer except the PFP upper drawer)
Causes: Tray-up motor PFP board LGC board Tray-up sensor
Remedy: 1 Does the tray go up? (Perform the output check: 03-278, 280) Yes 2 No • Check if the connector of the tray-up motor is disconnected. (CN5, CN50) • Check if any of the connectors CN241, CN242 and CN244 on the PFP board is disconnected. • Check if the connector CN371 on the LGC board is disconnected. • Check if the connector pins are disconnected or the harnesses are open circuited. • Check if the conductor patterns on the PFP board and LGC board are short circuited or open circuited. 2 Is the tray-up sensor working? (Perform the input check: 03- [COPY]ON/[5]/[A], 03- [COPY]ON/[5]/[E] Yes 3 No • Check if the connector of the sensor is disconnected. • Check if any of the connectors CN241, CN244 and CN246 on the PFP board is disconnected. • Check if the connector CN371 on the LGC board is disconnected. • Check if the slit reaches the sensor. • Check if the connector pins are disconnected or the harnesses are open circuited. • Check if the conductor patterns on the PFP board and LGC board are short circuited or open circuited. 3 LGC board • Check if the conductor pattern on the LGC