Description: Carriage home position sensor not turning OFF within a specified period of time: The carriage does not shift from its home position in a specified time.
Causes: Carriage home position sensor Carriage home position sensor harness SYS board Scan motor Scan motor harness
Remedy: 1 Carriage locking Check if the carriage locking screw for packaging is attached. 2 Carriage home position sensor 1. Check if the harness of the carriage home position sensor is connected properly. 2. Check if the harness is caught or open circuited. 3 SYS board 1. Check if the connector of the SYS board (CN121, CN125, CN127) is connected properly. 2. Check if the mounted parts on the SYS board are damaged or abnormal. 3. Check if 24 V (CN127) on the SYS board is short circuited. 4. Check if 24 V is supplied to the SYS board (CN127). 4 Scan motor 1. Check if the belt tension is loosened. 2. Check if the motor fixing screw is loosened. 3. Check if the carriage wire and the timing belt come off. 4. Check if the connector (J007/J125) is connected to the motor properly. 5. Check if the harness of the motor is caught or open circuited.