Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi CF10 — Toshiba e-Studio 456

Code: CF10

Description: Communication module SRAM reading failure. [MJ-1101]
Causes: MJ-1101 Converter PC board Finisher control PC board
MJ-1101 (When MJ-6103 is installed) Converter PC board Finisher control PC board Hole punch control PC board
Remedy: MJ-1101 Main power switch Turn OFF the main power switch, then back ON. Setting of the equipment Check if the MJ-1101 is set as the specified finisher on the equipment. (08-4548) Converter PC board • Check the connectors and harnesses between the converter PC board and the finisher controller PC board. • Board check Finisher control PC board Board check
MJ-1101 (When MJ-6103 is installed) Setting of the equipment Check if the MJ-1101 is set as the specified finisher on the equipment. (08-4548) Converter PC board • Check the connectors and harnesses between the converter PC board and the finisher controller PC board. • Board check Finisher control PC board • Check the connectors and harnesses between the hole punch control PC board and the finisher control PC board. • Board check Hole punch control PC board Board check

← Xem tất cả mã lỗi Toshiba e-Studio 456

Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie