Description: Front cover open jam: The front cover has opened during printing.
Causes: Front cover opening/closing switch LGC board
Remedy: 1 Is the front cover open? Yes Close the cover. No 2 2 Is the front cover opening/ closing switch working? (Perform the input check in the test mode: 03- [FAX]ON/[9]/[D]) Yes 3 No • Check if the connector of the front cover opening/closing switch is disconnected. • Check if the connector CN310 on the LGC board is disconnected. • Check if the connector pins are disconnected and the harnesses are open circuited. • Check if the conductor pattern on the LGC board is short circuited or open circuited. • Replace the front cover opening/closing switch. • Replace the LGC board. 3 Is the voltage of 24V being supplied from the power supply unit? (Perform the input check in the test mode: 03-[FAX] ON/[2]/[A]) Yes 4 No • Check if the connector for 24 V power supply is disconnected. • Check if the connector CN301 on the LGC board is disconnected. • Check if the connector pins are disconnected and the harnesses are open circuited. • Check if the conductor pattern on the LGC board is short circuited or open circuited. • Replace the LGC board. 4 LGC board • Replace the LGC board.