Description: Stapling jam: Stapling is not performed properly. [MJ-1032/MJ-1033]
Causes: Stitcher home position switch Finisher controller PC board
Remedy: Finisher • Check if there is any paper in the finisher, saddle stitcher, or on the transport path of the equipment, or on the stapling tray. Remove it if there is. • Remove the staple cartridge from the finisher and remove staples stuck in the stapling unit. Stitcher home position switch • Check if the connector on the saddle stitcher controller PC board is disconnected or the harnesses are open circuited. Correct if any. • Check if the stitcher home position switches are working properly.