Description: Early arrival jam: A paper jam occurs because paper from the equipment arrives at the Finisher too early. [MJ-1032/MJ-1033]
Causes: Entrance sensor Finisher controller PC board
Remedy: Finisher • Check if there is any paper in the finisher or on the transport path of the equipment or on the finishing tray. Remove it if there is. • Check if there is any disconnection, incorrect installation or breakage on the entrance sensor (S1). Correct if any. • Check if the connector CN7 on the finisher controller PC board is disconnected from the entrance sensor (S1) and the harnesses are disconnected or open circuited. Correct if any.