Description: Scanning system related service call Carriage home position sensor not turning OFF within a specified period of time: The carriage does not shift from its home position in a specified period of time.
Causes: SLG board
Remedy: Are the carriages slightly moved to the feeding direction? Are the carriages staying at a position other than home position? Yes 1. Check if the connector of the scan motor is disconnected. 2. Check if the connector pin is disconnected and the harness is short circuited or open circuited. 3. Replace the SLG board. No 1. Check if the connector pin is disconnected and the harness is short circuited or open circuited. 2. Check if the conductor pattern on the SLG board is short circuited or open circuited. 3. Replace the SLG board.