Code: EA29
Description: Paper transport jam (stack transport delay): The buffer tray is extended to drop a stack of paper on the finishing tray but the previous stack has not yet exited. [MJ-1101/MJ-1106]
Causes: MJ-1101 Entrance sensor Transport sensor Finisher contoller PC board
MJ-1106 Entrance sensor (S1) Transport sensor (S2) Processing tray sensor (S12) Assist arm motor (M10) buffer tray guide motor (M2) Finisher control PC board (FIN)
MJ-1106 Entrance sensor (S1) Transport sensor (S2) Processing tray sensor (S12) Assist arm motor (M10) buffer tray guide motor (M2) Finisher control PC board (FIN)
Remedy: MJ-1101 Entrance sensor • Sensor check(S1) • Connector check (CN7, CN22) • Harness check Transport sensor • Sensor check(S2) • Connector check (CN7, CN22) • Harness check
MJ-1106 Finisher Check if there is any paper in the finisher or on the transport path of the equipment and remove it if there is. Entrance sensor (S1) • Sensor check • Connector check • Harness check Transport sensor (S2) • Sensor check • Connector check • Harness check Processing tray sensor (S12) • Sensor check • Connector check • Harness check Paper holding cam Is there any mechanical problem when the paper holding cam is rotated? Assist arm motor (M10) • Motor check • Connector check • Harness check Buffer tray guide Open and close the buffer tray guide. If there is any mechanical problem, fix its mechanism. buffer tray guide motor (M2) • Motor check • Connector check • Harness check Finisher control PC board (FIN) • Board check • Connector check (CN6, CN13, CN11, CN18, CN26) • Harness check
MJ-1106 Finisher Check if there is any paper in the finisher or on the transport path of the equipment and remove it if there is. Entrance sensor (S1) • Sensor check • Connector check • Harness check Transport sensor (S2) • Sensor check • Connector check • Harness check Processing tray sensor (S12) • Sensor check • Connector check • Harness check Paper holding cam Is there any mechanical problem when the paper holding cam is rotated? Assist arm motor (M10) • Motor check • Connector check • Harness check Buffer tray guide Open and close the buffer tray guide. If there is any mechanical problem, fix its mechanism. buffer tray guide motor (M2) • Motor check • Connector check • Harness check Finisher control PC board (FIN) • Board check • Connector check (CN6, CN13, CN11, CN18, CN26) • Harness check