Remedy: Setting of the equipment • Check if the MJ-1101, MJ-1106, MJ-1032 or MJ-1033 is set as the specified finisher on the equipment (08-4548). Finisher • Check if the harness connecting the equipment and the finisher controller PC board is disconnected or open circuited. • Check if the conductor pattern on the finisher controller PC board is open circuited or short circuited. • Update the finisher firmware. Converter • Check if the connector connecting the converter board and the LGC board on the equipment is disconnected or open circuited. • Check if the conductor pattern on the converter PC board is open circuited or short circuited. • Update the converter firmware.