Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi E731 — Toshiba e-Studio 457SD

Code: E731

Description: Stop jam at the exit sensor: The trailing edge of the original does not pass the exit sensor after its leading edge has reached this sensor.
Causes: Exit sensor RADF board Exit roller Replace it if it is worn out.
Remedy: Exit roller Clean the registration roller if it is stained. Exit sensor • Sensor check (Perform the input check: 03-[FAX] ON[7]/[E]) • Connector check (CN74) • Harness check RADF board • Board check • Connector check (CN74) • Harness check

← Xem tất cả mã lỗi Toshiba e-Studio 457SD

Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie