Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi EA26 — Toshiba e-Studio 457SD

Code: EA26

Description: Paper transport jam (stop command request): A command to stop equipment operation is received while paper is being transported in the Finisher. [MJ-1101/MJ-1106] Paper transport jam in the Finisher (stop command request): The equipment is required to stop during the transporting of paper in the Finisher. [MJ-1032/MJ-1033]
Causes: MJ-1101 Entrance sensor Transport sensor Finisher contoller PC board
MJ-1106 Entrance sensor (S1) Transport sensor (S2) Processing tray sensor (S12) Assist arm motor (M10) buffer tray guide motor (M2) Finisher control PC board (FIN)
Remedy: MJ-1101 Entrance sensor • Sensor check(S1) • Connector check (CN7, CN22) • Harness check Transport sensor • Sensor check(S2) • Connector check (CN7, CN22) • Harness check
MJ-1106 Finisher Check if there is any paper in the finisher or on the transport path of the equipment and remove it if there is. Entrance sensor (S1) • Sensor check • Connector check • Harness check Transport sensor (S2) • Sensor check • Connector check • Harness check Processing tray sensor (S12) • Sensor check • Connector check • Harness check Paper holding cam Is there any mechanical problem when the paper holding cam is rotated? Assist arm motor (M10) • Motor check • Connector check • Harness check Buffer tray guide Open and close the buffer tray guide. If there is any mechanical problem, fix its mechanism. buffer tray guide motor (M2) • Motor check • Connector check • Harness check Finisher control PC board (FIN) • Board check • Connector check (CN6, CN13, CN11, CN18, CN26) • Harness check

← Xem tất cả mã lỗi Toshiba e-Studio 457SD

Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie